At Granite Direct , we stock an excellent range of pre-cut and pre-polished granite lengths/ blank’s of the highest quality. These Pre-cut countertops are imported direct from our over sea’s suppliers with one long edge polished and the two ends/ returns of each worktop already polished with a chamfered edge profile (Island top’s and peninsular’s come with all edges already polished).
This reduce’s the time it takes for us to manufacture your kitchen worksurfaces, thus reducing cost to us the manufacturer, this means a reduced price to you the customer. Not all kitchens are ideally suited to the use of granite blank’s or pre-cut length’s, due to the set size’s they are available in i.e a kitchen with the unit’s fitted 700mm from the wall (front to back) will not accommodate a worktop blank measuring 650mm deep (front to back), but providing your kitchen is fitted to within these limit’s, you would be left with a professionally installed, beautifully crafted kitchen work surface of the highest standard and quality, but at a discount price.
Should you require advice or a quote please call our office on 0845 227 0080.
Granite |
Blanks/lengths |
Islands |
Peninsulars |
|
2500mmx650mm |
1540mmx1040mm |
1800mmx900mm |
Autum Leaf |
£200.00 |
£250.00 |
£250.00 |
Balnco Pearla |
£200.00 |
£250.00 |
£250.00 |
Giallo Marbella |
£200.00 |
£250.00 |
£250.00 |
Baltic Brown |
£240.00 |
£320.00 |
£320.00 |
Nero Impala |
£240.00 |
£320.00 |
£320.00 |
Midnight Black |
£250.00 |
£320.00 |
£320.00 |
Blue Pearl |
£350.00 |
£420.00 |
£420.00 |
Emerald Pearl |
£350.00 |
£420.00 |
£420.00 |
Star Galaxy |
£350.00 |
£420.00 |
£420.00 |
Extra Works |
Unpolished/sawn cut outs |
£85.00 |
Polished cut outs |
from £140.00 |
Draining grooves(1 set of 5) |
£150.00 |
Tap Holes |
£25.00 |
Extra Cuts |
£25.00 |
Polished Ends |
£35.00 |
Full bullnose |
£65.00. per linear meter |
Half bullnose |
£50.00. per linear meter |
Pencil edge profile |
£30.00. per linear meter |
Standard/ chamfer edge profile |
£25.00.per linear meter |
Templating & Installation |
£450.00 |
- Other please ask
Curves, angled/rounded corners and breakfronts etc are also available and would need to be quoted individually.
Prices are per blank.
All prices are subject to VAT
Should you decide to go ahead with your order, a 50% deposit would be required and the balance would be payable on completion.
All natural materials supplied are subject to their natural markings, veining, venting and variations in colour and shade. No claim on this account can be made.
Tolerance in dimensions and thickness is +/- 2mm.
Granite Direct reserve the right to change prices without prior notice.
In order to process any order written confirmation is required.
Granite (full sheet’s/ slab’s).
These are cut to the required size from a full sheet (usually around 3m x 1.8m but can vary).Polished edges are extra, and charged for per linear meter (see “extra work’s” below). Granite’s from this range can be cut to any size within the size of the full slab.
The maximum length available from this range would be around 2.9m depending on the size of the slab (as some vary in size).
Although not quite as cheap as ordering from the blank’s or pre-cut range of granite’s, this selection offer’s top quality natural stone with great value for money.
Going direct cut’s out the middleman and save’s you £££’s whilst getting you the same level of quality and service.For a quote or advice please call our office on 0845 227 0080 ,or fax us a drawing detailing all your requirement’s (i.e which granite’s you are interested in /edges requiring polishing/ sink type/ drainer’s or no
drainer’s/hob cut out or no hob cut out etc and all relevant measurements - length’s AND depth’s from front to back) to 0871 661 3285.
